Wholesale Replica HYT SKULL watch Bespoke Skull Brazil

 
Poster un nouveau sujet   Répondre au sujet    Ligue Morphine Index du Forum // Espace Membres // Présentation
Sujet précédent :: Sujet suivant  
Auteur Message
yoancke
Spectateur

Hors ligne

Inscrit le: 13 Nov 2017
Messages: 2
Pseudo S4: yoancke
Point(s) de Pari: 0

MessagePosté le: Lun 13 Nov - 10:15 (2017)    Sujet du message: Wholesale Replica HYT SKULL watch Bespoke Skull Brazil Répondre en citant



Discount Bovet replica watches


Richard Mille Auto RM 07-01 Ladies

This special ladies' watch debuted at SIHH 2014 with a pierced automatic movement and a number of innovative technologies developed by Richard Mille. The design and execution of the watch shows a complete conceptual approach to the movement, case and dial. Therefore, everything is built according to very strict norms and completely harmonious.

The base and bridge are made of 5-grade titanium and pass through a grade 5 titanium alloy
The plasma process, which provides the base with high rigidity and precise surface smoothness, is crucial to the perfect functioning of the gear train. The bridge is also treated with Grade 5 titanium, microblasted and electroplasma. Hollow base and bridges were individually and extensively validated to ensure the best possible strength requirements.
Rotor variable geometry
- Heavy duty outer edge and 5N red gold heavy edge ring - Heavy metal
Weight section
- Ceramic ball bearings
- Automatic Winder System OneWay® with ceramic ball bearings
- Two-way winding system


shopping replica HYT SKULL Watches


This rotor with variable inertia has been incorporated into the caliber CRMA2 because it allows the rotor to be set according to the owner's activity level. Modify the settings by adjusting the two weights that can be moved to the correct position and held in place by spline screws. When two weights are close to each other, the inertia of the movement increases, and the barrel rewinds quickly. If the weight is at the end of the rotor, the inertia drops, causing the winding to wind more slowly.
Variable inertia free spring balance
Ensures even greater reliability in the event of impact and during assembly and disassembly of the movement, resulting in better timing results over time. The regulator index has been eliminated, thus ensuring that a more accurate and repeatable adjustment is possible, since the four small adjustable weights lie directly on the balance.luxury replica watches for sale
Quickly rotate the bucket (5 hours per revolution instead of 7.5 hours)
This type of barrel has the following advantages: - Significantly reduced winding adhesion over a periodical period to improve performance,
- Provides excellent mainspring triangle curve with ideal power reserve / performance and regularity ratio.







Newly developed gear tooth profile
The watch's entire operation, the entire movement of the main power transmission devices are used special profile gear. Developed for the CRMA2 movement, the wheel uses a pressure angle of 20 °. The system balances any discrepancies that can occur between each axle and facilitates the transmission of superb torque to the balance to support outstanding timing characteristics.
Grade 5 titanium spline screw for sports
The torque applied to the screw during assembly can be better controlled. Therefore, these screws are not affected by physical operations during assembly or disassembly and are not subject to aging.
movement
CALIBER CRMA2: Hollow automatic movement with hour, minute and adjustable rotor geometry. Power Reserve: Card 50 hours (± 10%)
Sport size: 29.90 X 22.00 mm
- Thickness: 4.92mm - Precious stones: 25
- Balance: cube, 4 arms, 4 set screws, moment of inertia 7.5 mg cm, lift 50º angle
- Frequency: 28,800 vph (4 Hz)
- Balance spring: AK3
- Impact protection: Incabloc 908.22.211.100 (clear)
- Escape wheel jewelry: Rubifix (transparent)


buy Urwerk 103 replica watches


Case
The design and execution of the watch demonstrates a complete conceptual approach to the movement, case and dial. So everything is built to very strict specifications and integrity. For example, the ferrule ring is no longer used and the movement is mounted on a chassis mount rubber (ISO SW) secured by 2 titanium screws. Features such as this are evidence of uncompromising craftsmanship. CRMA2 movement using a unique combination of materials, such as strap and bezel white ceramic and case. It is particularly impact and scratch resistant and undergoes prolonged production processes leading to the final matte finish. Strap 5N red gold mosaic, polished column.
RM 07-01 has TPZ-Z brown ceramic, ATZ white ceramic and white or red gold. The three-part case is water-resistant to 50 meters and is guaranteed by 2 Nitril O-rings. Shell consists of 12 5 titanium spline screws and 316L stainless steel wear washer. Size: 45.66 x 31.40 x 11.85 mm.Online replica Richard Mille RM 39 watches
New patent stem structure
This newly designed crown guarantees the integrity of the sport and is immune to the outside world as it does not use classic crown accessories to get into the depths of the moving heart. As a result, the Crown can not actually be removed and can easily be inserted and removed in the watchmaker's skilled hands when needed; a typical longevity view representing the brand's philosophy. Long-term protection of the ideal solution to sports.
Grade 5 titanium spline screws for installation,
The torque applied to the screw can be better controlled. Therefore, these screws are not affected by physical operations during assembly or disassembly and are not subject to aging.
On the flange
In carbon fiber; index points full of approved luminescent materials.
crystal
Bezel side: sapphire (1800 Vickers), anti-glare treatment (2 sides).
Thickness: 1.60 mm at the end of the table
: Sapphire anti-glare treatment (2 sides)
Thickness: Center 0.95 mm, the outer edge of 1.67 mm
finishing
Movement
Micro-cutting corner knife
- Micro-cutting machine processing part
- Micro-stamping sinking
Plasma processing substrates and bridges
Steel parts
- Satin finishing
- Hand polished
- Hand polished sink
- polished section
Contour turning
- Lap and polish both ends
- polished pivot
- polished surface
Polishing wheels
- Concave chamfer with diamond tool
- Diamond polishing angle
- round surface
- rhodium plating (before cutting)


replica HUBLOT MP-02 KEY OF TIME 902.NX.1179.RX watch






Revenir en haut
Publicité






MessagePosté le: Lun 13 Nov - 10:15 (2017)    Sujet du message: Publicité
PublicitéSupprimer les publicités ?
Revenir en haut
Poster un nouveau sujet   Répondre au sujet    Ligue Morphine Index du Forum // Espace Membres // Présentation Toutes les heures sont au format GMT + 2 Heures
Page 1 sur 1

 
Sauter vers:  

Index | Panneau d’administration | creer un forum | Forum gratuit d’entraide | Annuaire des forums gratuits | Signaler une violation | Conditions générales d'utilisation
alexisBlue v1.2 // Theme Created By: Andrew Charron // Icons in Part By: Travis Carden // Modified By: Getsukei
Powered by phpBB © 2001, 2018 phpBB Group
Traduction par : phpBB-fr.com